Pelco VMX300 installation manual Mounting, Rack Mount Installation

Mounting

Mount the VMX300(-E) in an EIA-standard 19-inch (48.26 cm) equipment rack, or place it on a flat surface, such as a shelf or table. Follow these instructions to mount the VMX300(-E) in an equipment rack:

1.Attach the two brackets to both sides of the VMX300(-E).

2.Attach the mounting rails to the equipment rack.

3.Place the workstation onto the mounting rails. It should slide in and out of the rack easily.

4.Fasten the rack ears to the equipment rack.

VMX300(-E)

(4)SCREWS, 10-32 X 0.750-INCH,

PHILLIPS, PAN HEAD WITH WASHERS

REAR MOUNTING RAIL	(8) SCREWS,
	10-32 X 0.375-INCH,
	FLAT HEAD

	(6) SCREWS,
FRONT MOUNTING RAIL	8-32 X 0.375-INCH,
	PAN HEAD WITH
	WASHERS
RACK

(4) SCREWS,

10-32 X 0.375-INCH,

FLAT HEAD

BRACKET

(SIDE VIEW)

(6) SCREWS, 8-32 X 0.250-INCH,

PAN HEAD

RACK EAR

SLOTTED HOLES	TAPERED ENDS
TOWARD FRONT
	TOWARD REAR
OF UNIT
	OF UNIT

Figure 14. Rack Mount Installation

C1552M-C (7/07) 21