A controllable camera that is switched through a switcher can either be controlled through the switcher or directly from the VMX300(-E) workstation. If you want to control the camera through the switcher, connect the camera’s data line to the switcher (refer to Figure 4). If you want to control the camera from the VMX300(-E) workstation, connect the camera’s data line to the workstation. The video from both cameras is connected to the switcher.

PTZ CAMERA

PTZ CAMERA

 

 

 

 

 

 

VMX WORKSTATION

SWITCHER

VIDEO DISPLAY DEVICES

LEGEND

DATA

VIDEO

Figure 4. Two Cameras Controlled by Different Device Drivers

In Figure 4 video and data are transmitted over separate wires. In Coaxitron® transmission, however, both video and data are transmitted over a single coaxial cable, as illustrated by the camera on the left in Figure 5. Fixed cameras, like the one on the right, are not controllable and therefore do not transmit data.

VIDEO DISPLAY DEVICES

VMX WORKSTATION

LEGEND

DATA

VIDEO

COAXITRON

SWITCHER

FIXED CAMERA

PTZ CAMERA

Figure 5. Coaxitron and Fixed Camera Transmission

C1552M-C (7/07)

13

Page 17
Image 17
Pelco VMX300 installation manual Coaxitron and Fixed Camera Transmission