5 Press the four-way controller (3) and use the four-way controller (45) to select hor i.

The self-timer lamp will blink to let you know that the camera is in remote control wait status.

Drive Mode

Remote Control Unit

OK OK

121

6 Press the 4 button.

The camera is ready to take a picture.

7 Press the shutter release button halfway.

The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.

• You cannot focus with the remote control unit in default settings. Focus on the subject first with the camera before operating with the remote control. You can set [9. AF in remote control] to [On] in the [A Custom Setting] menu (p.75).

When using the remote control unit, flash does not pop up automatically even when set to g (Auto discharge). Pop up the flash manually beforehand. (p.65)

8 Point the remote control unit

 

towards the remote control

5 m

receiver on the front of the camera and press the shutter release button on the remote control.

The operating distance of the remote

control unit is about 5 m from the front of the camera.

For h, the shutter will be released immediately after the shutter release button is pressed.

For i, the shutter will be released in three seconds after the shutter release button is pressed.

After the picture is taken, the self-timer lamp lights for 2 seconds and then returns to blinking.

4

Functions Shooting