Troubleshooting243
We recommend checking the following items before contacting a service center.
Problem | Cause | Remedy | |
| Batteries are not | Check if batteries are installed. If not, install | |
| installed | charged batteries. | |
The camera | Batteries are not | Check orientation of batteries. | |
does not turn | |||
on | installed properly | symbols. (p.37) | |
| |||
| The battery power | Replace with charged batteries or use the | |
| is low | AC adapter | |
| The lens aperture | Set the lens aperture ring to the s position | |
| (p.87) or select [Permitted] in [23. Using | ||
| ring setting is other | ||
| than the s position | aperture ring] in the [A Custom Setting] | |
|
| menu. (p.230) | |
The shutter | The flash is | Wait until charging is finished. | |
does not | charging | ||
| |||
release | There is no | Insert an SD Memory Card with available | |
| available space on | ||
| the SD Memory | space or delete unwanted images. (p.41, | |
| p.72) | ||
| Card | ||
|
| ||
|
|
| |
| Recording | Wait until recording is finished. | |
|
| Autofocus cannot focus well on subjects | |
|
| that have low contrast (the sky, white walls), | |
|
| dark colors, intricate designs, rapidly- | |
| The subject is | moving objects or scenery shot through a | |
| window or a | ||
| difficult to focus on | another object located at the same distance | |
|
| as your subject (press the shutter release | |
|
| button halfway), then aim at target and | |
|
| press the shutter release button fully. | |
The |
| Alternatively, use manual focus. (p.109) | |
Autofocus |
| Position the subject in the focus frame in the | |
does not work | The subject is not | middle of the viewfinder. If the subject is | |
| outside the focusing area, aim the camera | ||
| in the focusing | at the subject and lock the focus (press the | |
| area | shutter release button halfway), then | |
|
| compose a picture and press the shutter | |
|
| release button fully. | |
| The subject is too | Move away from the subject and take a | |
| close | picture. | |
| The focus mode is | Set the focus mode lever to =. (p.102) | |
| set to \ |
|
12
Appendix