138

Changing the Built-in Flash Discharge Method

You can change the built-in flash discharge method in wireless mode.

1

On

Discharges the built-in flash.

2

Off

Discharges the built-in flash as a control flash.

Set in [16. Flash in Wireless Mode] in the [A Custom Setting] menu (p.76).

HSb (High-speed sync) is not available when the camera is set to discharge the built-in flash.

Wireless Shooting

Using a Combination of the Built-in Flash and an External Flash Unit

1Remove the external flash unit after the channel was set on the camera, and place at the desired location.

5

2

Set the camera flash to r mode, and pop up the built-in flash.

Using

3

Confirm that both flashes are fully charged and then take the picture.

 

the

 

Using a Combination of External Flash Units

1

Set the wireless mode of the external flash directly connected to the

Flash

 

camera to [MASTER] or [CONTROL].

 

 

 

 

 

 

 

 

MASTER

Discharges both the flash directly connected to the camera

 

 

and the flash connected to another flash unit.

 

 

 

 

 

CONTROL

The flash directly connected to the camera is discharged as

 

 

a control flash only and does not discharge as main flash.

 

 

 

2On the wireless remote flash unit, set the wireless flash mode to [SLAVE] and set the channel to the same channel as the flash directly connected to the camera. Then, place at the desired location.

3 Confirm that both flashes are fully charged and then take the picture.

Shake Reduction is not available in Wireless mode.