Using
You can use
•
•
Using b (Shutter Priority) Mode
1Set the mode dial to b.
b (Shutter Priority) mode is set.
2Use the
The background is not properly exposed if aperture value is blinking when shutter speed is set. Set the shutter speed so that aperture value does not blink.
3Press the K button. The flash pops up.
4 Take the picture.
Using a (Manual) Mode
1Set the mode dial to a. a (Manual) mode is set.
2Set the shutter speed (under 1/180 sec.) and aperture value to obtain correct exposure.
3Press the K button. The flash pops up.
In a (Manual) mode, you can raise the flash at any time prior to shooting.
4 Take the picture.
131
5
Flash the Using