245

Problem

Cause

Remedy

 

The Shake

Turn on the Shake Reduction switch. (p.68)

 

Reduction function

 

is off

 

 

The Shake

If a lens for which focal length information

 

cannot be acquired is used, set the [Focal

 

Reduction function

 

is not set properly

Length] on the [Input Focal Length] menu.

Shake

 

(p.69)

Shutter speed is

 

Reduction

too low for the

 

does not work

Shake Reduction

Turn off the Shake Reduction function and

 

function to be

 

effective when

use a tripod.

 

panning or

 

 

shooting night

 

 

scenes, etc.

 

 

The subject is too

Move away from the subject, or turn off the

 

close

Shake Reduction function and use a tripod.

In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the batteries out and putting them back in again. When the mirror remains in the up position, take the batteries out and put them back in again. Then, turn the power on. The mirror will retract. After the procedure is done, if the camera operates correctly, it does not require any repairs.

12

Appendix