3 Press the shutter release button fully.

The picture is taken.

4 Push down on the portion indicated in the illustration to retract the flash.

Using Flash On Mode b, D

1 Press the K button.

The built-in flash pops up and begins charging. Flash On mode is used regardless of the flash mode settings. When the flash is fully charged, b appears in the LCD panel and viewfinder. (p.27, p.29)

When Flash mode is set to g or i and you pop up the built-in flash, you can switch between Auto discharge mode and Flash On mode by pressing the K button under the following conditions.

• Shooting mode is set to I, =, s, q, \, or ..

• H mode is set to i, K, C, or E.

2 Press the shutter release button fully.

The flash discharges and the picture is taken.

65

3

Operations Basic

3 Push the flash down to retract.