Use a brush-less blower to remove dirt and dust from the CCD. Using a blower with a brush may scratch the CCD. Do not wipe the CCD with a cloth.
8 Turn off the camera.
9 Attach the lens after the mirror returns to its original position.
Clean the CCD.
7
Press the 4 button.
The mirror is locked in the up position.
If you used Dust Alert to detect dust on the sensor within the last 30 minutes, the Dust Alert image appears on the monitor. Clean the sensor while checking the location of the dust.
6
Use the four-way controller (23) to select [Mirror Up].
5
Press the four-way controller (5). The [Sensor Cleaning] screen appears.
4
234
Sensor Cleaning
Starts mirror lockup to clean the sensor. Turn the power off to finish
Mirror Up
Cancel
OK OK
12
Appendix