Flash Mode
Wireless Mode
0.0

Setting the Channel for the External Flash

First set the channel for the external flash unit.

1 Set the channel for the external flash unit.

2 Attach the external flash to the camera hot shoe.

3Turn on the camera and the external flash, and press the shutter release button halfway.

The built-in flash is set to the same channel as the external flash unit.

• When set to r mode, the channel currently set for the built-in flash is displayed on the LCD panel for 10 seconds.

•Be sure to set all the flashes to the same channel. Refer to the AF540FGZ or AF360FGZ operating manual for details on how to set the channel on the external flash.

Using the Built-in Flash in Wireless Mode

Set the camera to wireless flash mode when using an external flash in combination with the built-in flash.

1Press the { button and press the four-way controller (3). The [Flash Mode] screen appears.

2Use the four-way controller (45) to select r mode.

Press the 4 button to return to Capture mode.

OK OK

When Drive Mode is set to i or the lens aperture is not set to the s position, r appears gray and cannot be selected.

137

5

Flash the Using