Error Message | Description | |
Not enough battery | Appears during pixel mapping if the battery level | |
is insufficient. Replace the batteries with new | ||
remaining to activate | ||
ones or use an AC adaptor | ||
Pixel Mapping | ||
(p.40) | ||
| ||
|
| |
Image folder cannot be | The maximum folder number (999) and file | |
number (9999) are being used, and no more | ||
created | images can be saved. Insert a new SD Memory | |
| Card or format the card. (p.203) | |
The image is not stored | The image could not be saved because of an SD | |
Memory Card error. | ||
| ||
| The DPOF settings or rotated image could not be | |
Settings not stored | saved because SD Memory Card is full. Delete | |
unwanted images and perform DPOF settings or | ||
| ||
| rotation again. (p.72) | |
|
| |
| The camera was unable to measure the manual | |
NG | white balance or detect dust on the sensor. Try | |
| the operation again. (p.152, p.231) | |
Rotation information | New rotation information cannot be saved to an | |
cannot be saved | ||
image without rotation information. | ||
to this image | ||
| ||
|
| |
No more images can be | You cannot select 100 or more images to delete | |
selected | at a time. (p.174) | |
|
| |
This RAW file cannot be | RAW files captured with other cameras cannot | |
developed | be edited on this camera. | |
This image cannot be | Appears when digital filter is started from Fn | |
filtered | menu for images captured with other cameras. | |
No DPOF files | No files are set with DPOF. Set DPOF and then | |
print. (p.190) | ||
| ||
|
| |
| There is an error with the printer and the file | |
Printer error | cannot be printed. Fix all the errors and try | |
| printing again. | |
No paper in the printer | Printer has run out of paper. Put paper in the | |
printer and print. | ||
| ||
Printer settings | The camera received notification that the printer | |
status has changed. Press the 4 button to | ||
are changed | ||
reconnect to the printer. | ||
| ||
|
| |
Low paper level | Printer is running out of paper. This appears | |
when this signal is received from the printer. After | ||
in the printer | ||
two seconds, the printer resumes printing. | ||
| ||
|
|
241
12
Appendix