![](/images/new-backgrounds/1267552/26755231x1.webp)
Applications
Mandatory Configuration
The P1705 & P1730 requires a minimum amount of mandatory configuration in order to operate. The following table identifies the configuration parameters that must be defined for proper operation under the operational states shown in the table.
Bridge | IP Router | IPX Router |
|
|
|
none | IP Address | none |
|
|
|
ISDN - U | ISDN – S/T | PPP ISDN |
|
|
|
ISDN Switch Type | ISDN Switch Type | B channel assignment |
Directory Numbers | Directory Numbers | Remote Site Profile |
|
|
|
Frame Relay | Lease Line | PPP Lease Line |
|
|
|
none (North America) | none | none (International) |
|
| Remote Site Profile |
|
|
|
Frame Relay enabled |
| Frame Relay disabled |
(International only) |
| (North America only) |
|
|
The configuration options required for proper initial operation are described in Section 2: Typical Applications and How to Configure Them. Each configuration requires a different set of parameters to be entered.
Refer to Section 2 for details on configuring the P1705 & P1730 in different operational states. Also refer to the P1705 & P1730 Menus Manual file for your operating software on the accompanying
Other options may be changed depending upon specific installation configurations. Refer to the menu tree in Appendix A for a reference of the menu structure and options.
10