Perle Systems 1700 manual Manual Configuration LMI Type

Applications



If during this learning process the maximum number of remote sites has been reached, the router will prompt you that there are no remote sites available. A new remote site cannot be auto-created unless one of the existing remote sites is manually deleted.

Auto-learning with PPP encapsulation enabled (see following page) may not be compatible with some older model routers. If problems with auto-learning occur with PPP enabled, try disabling PPP encapsulation.

Manual Configuration - LMI Type

The LMI Type option allows you to manually specify the type of Link Management Interface in use by the Frame Relay service provider for the Frame Relay service.

When the LMI type is set to none, the router simply creates frame relay packets and sends them on the defined PVC’s. The links are not checked for errors. There is no congestion control checking. The link is only monitored for control signals.

To manually configure the LMI type the Auto-Learning option must be disabled.

Auto-Learning

Location: Main

ªConfiguration

ªWAN Set-up

ªLink Set-up

ªFrame Relay Set-up

ªAuto-learning Enabled

	LMI Type
	Location: Main
	ªConfiguration
	ª WAN Set-up
	ª Link Set-up
	ª Frame Relay Set-up
	ª LMI Type
	The configuration options described here are only for initial set-up and configuration
	purposes. For more complete information on all of the configuration parameters
	available please refer to the “P1705 & P1730 Menus Reference Manual” file on the
	accompanying CD-ROM.

34