Perle Systems 1700 manual Schedule, Recovery

Applications

Configure Remote Site Profiles for Frame Relay with ISDN backup

Frame Relay operation is set-up as described in section 2.3.2





The PVC on both partner routers must be disabled during this set-up procedure, then re-enabled when ready to start.

ISDN call set-up is done as described in section 2.3.1.

Recovery operation is set-up on the secondary activation menu.

If the ISDN circuit is to be available only at specified times, rather than all the time (the default), set-up a recovery schedule with times the connection is to be activated and deactivated

Activation Schedule

Location: Main

ªConfiguration

ªWAN Set up

ªRemote Site Set-up

ªEdit Remote Site

ªConnection Set-up

ªActivation

ªSchedule

Enter “a” and the times the recovery circuit is to be made available, enter “d” and the times the recovery circuit is to be deactivated.

Enable the secondary activation circuit for recovery

Recovery

Location: Main

ªConfiguration

ªWAN Set up

ªRemote Site Set-up

ªEdit Remote Site

ªConnection

ªRecovery

The recovery schedules MUST be set identically on both partner PPP routers to operate; if they are not, one router will try to bring the link up and the other will shut it down.

46