Perle 10/100/1000 Ethernet Extended Temperature Media Converter
Installation Guide
2
This document contains instructions necessary for the installation
and operation of the Perle Standalone Extended Temperature
10/100/1000 rate converting Media Converters (S-1110-XT).
These products have the ability to convert 10/100/1000Base-T
cable connections (copper) to 100/1000Base-X connections
(fiber). The fiber connection can be either single mode (SM) or
multimode (MM) and can operate over different wavelengths and
distances, depending on the model selected (see table below).
Extended Temperature Models
Model Connector
(xx) Mode
Distance Wavelength
(TX/RX)
S-1110-M2xx05-XT
SC/ST MM
550 m/1804
ft
.
850 nm
S-1110-S2xx10-XT
SC/ST SM
10 km/6.2 mi. 1310 nm
S-1110-S1SC10U-XT
SC SM
10 km/6.2 mi. 1310/1490 nm
S-1110-S1SC10D-XT
SC SM
10 km/6.2 mi. 1490/1310 nm
S-1110P-SFP-XT SFP Note 1.
Note 1: Fiber characteristics will depend on the SFP fiber module
selected.
Please visit Perle’s website for the most up to date Installation
guides models and specifications.