Philips 7206890100R00, 32PF9551/10 Store TV channels, Automatic installation, Manual installation

EN How to search for and store TV channels (Continued)

		Store TV channels
		After language and country are set correctly, you can now
TV menu		search for and store the TV channels.
		<	Select Channels in the TV, Installation menu.
Installation	Channels
		Automatic installation
Languages	Autom. installation
Country	Manual installation		The TV will scan the entire frequency spectrum based on
Channels	Rearrange		the selected country.
Preferences			>	All available TV channels are searched for and stored
				automatically.
Connections
				This will take a few minutes.
Decoder
			> When the search is complete, the menu will indicate the
Factory settings
				number of channels found.
Software upgrade
Info		Manual installation
			This gives you the possibility to manually install (tuning-in
			channel by channel) analogue channels.

1.Select Manual installation and press the cursor right.

2.Select System.

3.Select your country or part of the world where you are now located.

4.Select Search and press the cursor right.

Tip: if you know the frequency, enter the 3 digits of the frequency with the digit keys 0 to 9 (For example, 049).

5.Select the red or green colour key to proceed.

6.Press the cursor left to store the channel found or to search for another channel.

7.Select Fine tune and press the cursor right.

Fine tuning can be useful when the frequency has shifted a bit or when interference of another frequency occurs. Adjust the frequency with the cursor up/down in case of poor reception of the channel found.

8.Select Store current channel if you want to store the frequency under the current channel number.

Press the cursor right and confirm with the OK key. Select Store as new channel if you want to store the frequency under a new channel number.

Press the cursor right and confirm with the OK key.

9.Use the rearrange menu to rename or reshuffle the channels.

26