If the device, typically a Home Theatre Sys tem (HTS), als o has
the HDMI ARC connection, connect it to any of the HDMI
connections on this T V. With th e HDMI ARC connection, you
do not need to conne ct the extra audio cable that sends th e
sound of the TV picture to the HTS. The HDMI ARC
connection comb ines both signals.
You can use any HDMI connection on this TV to connect the
HTS but ARC is only available for 1 device/connection at a
time.
In case you prefer to s witch off ARC on the HDMI
connections , press h and select S Setup and press OK.
Select TV settings > Sound > Advanced > HDM I ARC .
Y Pb Pr
Component Video YPbPr is a high quality connection. The
YPbPr connection can be used for High Definition (HD) TV
signals. Next to the Y, Pb and Pr signals add the Audio Left
and Ri ght sign als for s ound.
Use the su pplied YPbPr adapter cable to connect your device.
Match the YPbPr (green, blue, red) connector colours with the
cable plugs when you connect.
Use an Audio L/R cinch to mini-jack (3.5mm) adapter cable
(not s upplie d) if your device also h as sou nd.
SCART
SCART is a good quality connection. The SCART connection
can be us ed for CVBS an d RGB video si gnals but can not be
used for High Definition (HD) TV signals. The SCA RT
connection comb ines vide o and audio signal s.
Use the su pplied SCART adapter cable to connect your
device.
Audio Out - Optical
Audio Out - Optical is a high quality sound connection. This
optical connection can carry 5.1 audio channels. If your audio
device, typically a Home Theatre Sys tem (HTS), has no HDMI
ARC connection, you can connect this sound cable to an
Audio In - Optical connection on the HTS. This Audio cable
will sen d the sound of the T V to the HTS.
You can set the type of the audio out signal to fit the audio
capabilities of your Home Th eatre Syste m.
In Help, press * List and look up Audio Out settings for
more information.
If the sound does not match the video on screen, you can
adjust the au dio to vide o synchroni zation.
In Help, press * List and look up Audio to video sync for
more information.
EasyLink HDMI CEC
EasyLink
With EasyLink you can operate a connected device with the
TV remote control. EasyLink uses HDMI CEC* to
communicate with the connected devi ces. Devices must
support HDMI CEC and must be connected with an HDMI
connection.
* Consumer Electronics Control
EasyLink setup
The TV comes with EasyLink switched on. Make sure that all
HDMI CEC settings are properly s et up on t he connecte d
EasyLink devices. EasyLink might not work with devices from
other brands .
HDMI CEC on other brands
The HDMI CEC functionality has different names on different
brands. Some examples are: Anynet, A quos Link, Bravia
Theatre Sync, Kuro Link, Simplink and Viera Link. Not all
brands are fully compatibl e with EasyLi nk.
Example HDMI CEC branding names are property of their
respe ctive ow ners.
10 Setting up / Connect devices