Audio Out format
With A udio Ou t format you can s et the audio out signa l of the
TV to fit the sound processing capabilities of your Home
Theatre System.
For more informa tion, press * LIST and look up Audio Out
format.
Audio Out leveling
With A udio Ou t level ing you can leve l the sound volume of
the Home Theatre Sys tem with the volume of the T V when
you switch over from one to anothe r.
For more informa tion, press * LIST and look up Audio Out
leveling.
HDMI ARC
If you do not need an A udio Return Channel (ARC) on any of
the HDMI connections, you can switch the ARC signal off.
For more informa tion, press * LIST and look up HDMI
ARC.
Audio Out delay
If you set an A udio sync delay on your Home Th eatre System,
to synchronise the s ound with the picture, you must s witch off
Audio Out delay on the TV.
For more informa tion, press * LIST and look up Audio Out
delay.
Audio Out off set
If you cannot set a del ay on the Home Theatre S ystem, you
can set a delay on the TV with Audio Out offse t.
For more informa tion, press * LIST and look up Audio Out
offset.
TV placement
As part of the first installation, this setting is set to either On a
TV stand or Wall mounted.
If you have changed the pl acement of the TV since then, adjust
this setti ng accordingly for best sound reproduction.
1 - Press h, select S Setup and press OK.
2 - Select TV settings > General settings > TV placement and
press OK .
3 - Select On a TV stand or Wall mounted and press OK.
4 - Press b, repeatedly if necessary, to close the menu.
Ambilight on or of f
Press AMBILIGHT on the remote control to open the
Ambilight mode menu. You can switch Ambilight On or Off.
Alternatively, you can select the Ambilight mode you prefer,
Dynamic or Static.
Ambilight brightness
With B rightness, you can set the level of brightness of the
Ambilight.
To adjust the level . . .
1 - Press h, select S Setup and press OK.
2 - Select TV settings > Ambilight > Brightness.
3 - Press x (right) and adjust the value with u (up) or v
(down).
4 - Press b, repeatedly if necessary, to close the menu.
Ambilight mode
Ambilight can have a dynamic or a static mode. With Dynamic,
the TV follows the colours of the im age on screen. You can
adjust the s peed at which A mbiligh t respon ds.
With Static, Ambilight has a constant static colour. You can
create an A mbilight s tatic colour yoursel f. First, s elect the
Ambilight mode you prefer.
To select an Ambilight mode . . .
1 - Press h, select S Setup and press OK.
2 - Select TV settings > Ambilight > Mode.
3 - Select Dynamic, Static or Off.
4 - Press b, repeatedly if necessary, to close the menu.
Dynamic speed
With D ynamic, you can set the speed at which Ambilight
respon ds to the images on screen. Adjust the speed between
Relaxed or Dynamic. The Ambilight mode must be set to
Dynami c before you c an adju st Dy namic spee d.
To adjust the speed . . .
1 - Press h, select S Setup and press OK.
2 - Select TV settings > Ambilight > Dynamic.
3 - Press x (right) and adjust the value with u (up) or v
(down).
4 - Press b, repeatedly if necessary, to close the menu.
42 TV / Ambilight settings