If Universal access does not appear in the Options menu,
switch on Universal access in Setup.
In Help, press * List and look up Universal access for more
information.
Audio description
Switch on
Digital TV channe ls can broad cast s peci al audi o comm entary
describing what is happening on s creen. To be able to set the
Audio description audio and effects, you have to switch on
Audio description first. Also, before you can switch on Audio
description, you h ave to switch on Universal access.
Audio description
With A udio description, a narrator's commentary is added to
the normal audio.
To switch on the commentary (if available) . . .
1 - With Universal access switched on, press o OPTIONS
and s elect th e Options tab in the menu bar.
2 - Select Audio description and press OK.
3 - Select On and press OK.
You can check if an audio commentary is available.
In the Options menu, se lect Audio language and look for an
audio lan guage marke d with a Ï.
Speakers / Headphone s
You can select where you want to hear the audio commentary.
On the TV spe akers only, on the headphones only or on b oth.
To set Speakers / Headphones . . .
1 - Press h, select S Setup and press OK.
2 - Select Satellite settings > Languages > Audio description
> Speakers / Headphones and press OK.
3 - Select Speakers, Headphones or Speakers + headphones
and pres s OK.
4 - Press b, repeatedly if necessary, to close the menu.
Mixed volume
You can mix the volume of the normal audio with the audio
commentary.
To mix the volume . . .
1 - Press o OPTIONS and select the Options tab in the
menu bar.
2 - Select Universal access > Mixed volume and press OK.
3 - Use the arrows up and down to set the slider bar.
4 - Press OK to confirm.
Audio eff ect
Some audio commentary can hold extra audio effects, like
stereo or fading sound.
To switch on Audio effects (if available) . . .
1 - Press h, select S Setup and press OK.
2 - Select Satellite settings > Languages > Audio description
> Audio eff ects and press OK.
3 - Select On or Off and press OK.
4 - Press b, repeatedly if necessary, to close the menu.
Speech
The audio commentary can also hold subtitles for the words
which are spoken.
To switch on these subtitles (if available) . . .
1 - Press h, select S Setup and press OK.
2 - Select Satellite settings > Languages > Audio description
> Speech and press OK.
3 - Select Descriptive (audio) or Subtitles and press OK.
4 - Press b, repeatedly if necessary, to close the menu.
Manual installation
Manual installation is intended for expert users.
You can use Manual installation to quickly add new channels
from a satel lite trans ponder. You need to know the freque ncy
and polari zation of th e transpon der. Th e TV w ill in stall al l
channels of that transponde r. If the trans ponder was in stalled
before, all its channels - th e former and the new ones - are
moved to the end of the channel list All.
You cannot use Manual installation if you need to change the
number of satellites. If this is needed, you have to do a
complete installation with Install satellit es.
To install a transponder . . .
1 - Press h, select S Setup and press OK.
2 - Select Satellite settings and press OK.
3 - Select Channel installation and press OK.
4 - Select Manual installation and press OK.
5 - If you have more than 1 satellite ins talled, select the
satellite/LNB for which you want to add channels.
6 - Set the Polarization you need. If you set the Symbol rate
mode to Manual, you can enter the symbol rate in Symbol
rate manually. Enter the Frequency and start searching for the
transponder.
7 - If a transponder is found, select Store and press OK to
store the new transponder on the selected LNB.
8 - Select Exit to leave the manual installation.
Troubleshooting
The TV cannot find the satellites I want or the TV installs the
same satellite twice
• Make sure that the correct number of satellites is set in
Settings at the start of the installation. You can set the TV to
search for One, Two or 3/4 satellites.
A dual head LNB cannot find a second satellite
• If the TV finds one satellite but cannot find a second one,
turn the dish a few de grees. Align the dis h to get the strongest
signal on the first satellite. Check the signal strength indicator
of the firs t sat elli te on scre en. With the f irst satel lite set at t he
strongest signal, select Search again to find the second satellite.
• Make sure the settings are set to Two satellites.
Changing the installation settings did not solve my problem
• All settings, satellites and channels are only stored at the end
of the ins talla tion w hen you fin ish.
All satellite channels are gone.
50 Satellite channels / Satellite installation