Philips 37HFL4481F/27, 42HFL5581L/27 Configure different settings, Configure the SmartFeatures

3Press to select one of the following options:

•ESP (Energy saving programmability): Set a time from 1 - 99 hours to enable ESP. If the TV does not receive any command for this time period, it enters the standby mode to save energy. Select OFF to disable ESP.

•DIGIT TIMEOUT: Set a time between 1 - 9.9 seconds. When you press a key on your RC, the TV will wait for the specified time before assuming that you are finished entering digits, and switching to the entered channel. The default time is three seconds. If you want to key in two-digit or three-digit channel numbers, do not select the time to be too short.

•3 DIGIT ENTRY: Select YES to enable the selection of three digit channel number (channel numbers 1 - 250 for cable mode and 2-250 for antenna mode). Select NO to enable the selection of only two-digit channel numbers (channel numbers 1 - 99 for cable mode and 2-99 for antenna mode).

•SOURCE MENU ITEM: Select YES to allow the guest to select a source from the guest menu using the guest RC. Otherwise, select NO.

•PIC FMT MENU ITEM: Select YES to allow the guest to select a picture format from the guest menu using using the guest RC. Otherwise, select NO.

•SMART WINDOW MENU ITEM: Select YES to allow the guests to watch inputs from a PC and an RF channel simultaneously, on a split screen. Otherwise, select NO.

•SMART GUIDE: Select YES to display the on-screen channel guide. The channel guide is not used with Pay-Per-View systems and should be set to NO.

•MIN VOLUME: Set the minimum volume.

•MAX VOLUME: Set the maximum volume.

•LODGENET CARD: Select YES to allow the use of Lodgenet.

Note

••The SMART GUIDE will show only those programs that have been assigned to one (or more) categories.

13 Configure different settings

1Enter the Philips Hospitality setup menu.

2 Press to select CONFIGURATION.

CONFIGURATION
SWITCH ON / OSD	>
PICTURE / SOUND	>
SECURITY	>
CONTROL	>
SMARTFEATURES	>
AUDIO FEATURES	>
CC / V-CHIP	>
HOTEL INFORMATION	>
HDMI CEC	>

3Press to select one of the available options to configure the settings:

•SWITCH ON / OSD: To configure settings such as volume, channel, picture format, power mode, etc that are used as default when the TV is switched on.

•PICTURE / SOUND: To configure picture and sound settings such as brightness, color, sharpness, tint, bass, balance, AVL, etc.

•SECURITY: To set the level of security. To enable keyboard and

RC lock, Pro: Idiom decryption and SmartSecure.

•CONTROL: To configure settings for channels, minimum and maximum volume, ESP, etc.

•SMARTFEATURES: To configure the SmartPower, USB break-in, SmartGuide Category, SmartUpdate, and software download settings.

•AUDIO FEATURES: To configure the correct audio source.

•CC/ V-CHIP: To configure closed caption and V-Chip settings.

•HOTEL INFORMATION: To configure the hotel information including hotel name and room number (required information when SmartSecure is enabled).

Configure the SmartFeatures

1	Enter the Philips Hospitality setup menu.
2	Press	to select CONFIGURATION > SMARTFEATURES.

SMARTFEATURES
SMARTPOWER	OFF
LOW POWER STANDBY	NO
SMARTCP	YES
SMARTSECURE	>
SMARTGUIDE CATEGORIES	>
USB BREAK-IN	NO
SMARTUPDATE	YES
SMARTUPDATE CHANNEL	87
SW DOWNLOAD	>

EN 17

English