Philips 9FF2 user manual Disconnect the USB cable

Models: 9FF2

1 70
Download 70 pages 53.41 Kb
Page 13
Image 13
•Disconnect the USB cable.

Navigate right to go to the source you want to copy your photo to.

Navigate down to select the media to copy to.

Navigate right to select which album to copy to.

Press the OK button to begin copying.

The copy screen disappears upon completion and a resized copy of the photo is stored inside the selected album.

You may move to other photos and continue this process until all the photos you want are copied to the selected album.

Press Play Slideshow to leave this menu and play the slideshow

Or navigate left to move back through the menus

WARNING: Do not remove the memory card before the copy screen disappears upon completion.

Note: When reading from a media card e.g. SD card, two folders (PC Folder and Camera Folder) may be displayed in the Photo Frame.

PC Folder: is the combination of all the pictures copied from a PC to the memory card. (Only JPEG format are recognized)

Camera Folder: is the combination of all the pictures created from a camera.

If a warning message shows up indicating no free space for more photos, you may need to remove some already stored photos first before copying more photos.

NOTE: Only JPEG format photos are supported. Sub-directories are not supported.

The number of photos accepted in this directory may be limited due to limited internal memory on Photo Frame. Therefore, it is highly recommended to put the photos on a memory card and copy the photos to Photo Frame from that memory card.

Disconnect the USB cable.

For Windows 2000 systems, remember to safely remove hardware before disconnection

After a few seconds, all photos in the root directory will be automatically added to Photo Frame and the root directory will be emptied.

- 12 -

Philips Electronics

Page 13
Image 13
Philips 9FF2 user manual Disconnect the USB cable