Philips bClever SV1 manual Operation, Messages, Direct key feedback

5. Operation	Preparation >
General 1 Press the y Standby button to switch on the projector.
– The Standby indicator starts blinking green.

MENU			OK
		VOLUME +
PICTUREI	SIZEI –		PICTUREI	SIZEI +
		VOLUME –
	DATA	S-VIDEO	VIDEO
STANDBY
		SOURCE	AV MUTE

–When the projection lamp is on, the Standby indicator lights up green and the start-up screen (when enabled) appears for several seconds.

	2		Select the required source (Auto, Data, RGBsync,YPbPr or RGBsog, S-Video,Video) by
			pressing the Source button.
		–	The sources that can be selected are shown on the screen.
		•	The required source can also be selected via the ‘Source’ option in the ‘Featues’ menu of the
			On Screen Display (OSD) menu.
Notes		–	When only one input source is connected, this source will automatically be selected (‘Auto
			Source’). When more input sources are connected, the source with the highets priority will be
			selected (Data, RGBsync,YPbPr or RGBsog, S-Video, Video). Source selection can be changed in the
			‘Features’ menu.
	3		Switch on the computer or start video playback.
		–	A feedback message appears on the screen, indicating the selected source. ‘Feedback’ should
			be enabled in the ‘Set up’ menu.
Messages		Direct key feedback
		Direct key feedback is given when settings/adjustments are made directly via the remote control or
		local keyboard. Feedback is given by means of a slider, a simple dialog or a list of options.
		Sliders are used when setting e.g.:
		– volume;
		– picture size;
		– keystone correction;
		– brightness;
		– contrast;
		– colour tracking.
		Dialogs are used when setting e.g.:
		– keystone correction;
		– child lock.
		Lists are used when setting e.g.:
		– picture format;
		– source.

Philips Multimedia Projector 20 English User guide bClever SV1