User Manual BDH4251V/00
EN Selecting INPUT SIGNAL
INPUT SIGNAL
•Used to select INPUT signal of external device connected to the PDP.
P.MODE PICTURE FMT | AV | |
S.MODE | S.EFFECT | PIXEL SHIFT |
PIP | POSITION COLOR TEMP | |
PIP SOURCE | SWAP | RECALL |
MENU |
|
|
VOL |
| VOL |
TIMER STILL MUTE
1 Press the Input Signal Selecting Button.
• Press the “AV” button on the remote control, or select the
AV | desire input signal using Keypad of the PDP unit. |
|
•When you press the “AV”button, you will see the OSD as shown. you can move using “ 
“and select desire input
mode with “ 
“button.
| AV 1 |
Picture | AV 2 |
| AV 3 |
Sound | Component |
| PC |
Screen | HDMI |
Feature
Input
Move | Select | MENU | Exit |
|
|
|
|
NOTES:
1)If an external device is not connected or INPUT signal is not applied a Warning Message (“No Signal”) will be displayed.
2)In this case, check if external device is connected and/or terminal connection is properly fitted.
3)Also, you can select input using [INPUT SELECT] button in the keypad of the PDP unit
45
