Philips BDH4251V/00 EN Watching Two Pictures Simultaneously, Engaging PIP mode, Swap the pictures

User Manual BDH4251V/00

EN Watching Two Pictures Simultaneously

• PIP (Picture-in-Picture) and P-by-P(Picture-by-Picture) modes allow users to watch two pictures simultaneously.

Screen Adjustment of the Sub-picture

•Alpha Blend of the sub-picture can be adjusted on Screen Menu of OSD.

•Alpha Blend is only available in PIP mode.

Alpha Blend

The adjustment of alpha blend allows the sub- picture to be translucent. The translucent rate is controlled with “◀▶” buttons.

Engaging PIP mode

1	PIP	POSITION C	• Press the ‘PIP’ button once on the remote control to engage
			the Picture-in-Picture mode.
	PIP SOURCE	SWAP	• By pressing the button repeatedly, it will show the following
			cycle.

•If switched to P-by-P (Picture-by-Picture) mode, the screen will be split in half. The screen on the left side is the main picture, and the sub-picture will be on the right of the screen.

PIPP-by-P

Main Main Main Sub

Sub

	Position of the Sub-picture
2	• When PIP mode is engaged, the sub-picture can be displayed in
	one of the four corners by using 'POSITION' button.
	• Whenever pressing the button, the sub-picture will be cycling in
	the following order.
	• If you would like to move the sub-picture to specific position you
	desire, use navigation keys.
		<Using ‘Position’ button>
		Main		Main
					<Using “CB” and
			Sub	Sub	“WV” button>
						Sub
		Main	Sub	Sub
				Main

3 Swap the pictures

• In order to swap between the main picture and sub-picture, press the ‘SWAP’ button.

39