User Manual BDH4251V/00
P.MODE PICTURE FMT AV
S.MODE S.EFFECT PIXEL SHIFT
PIP POSITION COLOR TEMP
PIP SOURCE SWAP RECALL
VOLVOL
MENU
TIMER STILL
R-48F01
MUTE
11
Remote Control
Note
• Use two “AAA” batteries.
• Be sure to use replacement batteries of the
same type as the original ones.
• The life of a battery depends on how much
it has been used.
*The number in ( )indicates the page in which
the function of each button is explained in detail.
Use this function to make video input
selection.
It changes in the following sequence
AV 1 -> AV 2 -> AV 3 -> Component
-> PC -> HDMI
Used to display a desired menu.
While the AC power cord is connected,
turn the display ON (Green light) or OFF
(red light stand-by)
Menu button
Volume button
P.MODE button
S.MODE button
Power button
13
41
31
43
Press to use a spatial sound effect.
S.EFFECT button
32
AV button
14
Press this button to freeze the picture.
STILL button
Each time you press this button, a
different input mode appears. The
sequence is as follows: 15Min. -> 30Min.
-> 60Min. -> 90Min. -> 120Min. -> OFF
After the time is selected, it automatically
becomes stand-by state.
Timer button
39
RECALL button
PIP button
39
58
Whenever pressing the button, it
cycles in the following order.
Normal -> Dynamic -> Cinema -> User
PICTURE FMT button
35
Adjusts the size of the screen
(Normal, 16:9, etc.)
Whenever pressing the button, it
cycles in the following order.
Normal -> Movie -> Music -> News -> User
Indicates the current state and resolution.
PIXEL SHIFT button
55
The whole screen shifts up/down,
left/right at 25 sec interval to minimize
image sticking.
COLOR TEMP button
34
46
Mute button
Mute sound.
32
Change the colour mood of the panel.