Philips BDH5031V.00 Watching Cable Broadcasts, Connect a Cable Broadcasting Receiver to the PDP

User Manual BDH5031V

5.2	WATCHING CABLE BROADCASTS
• To watch cable broadcasts, subscribe to your local cable TV broadcast-
ing, and then connect a cable Broadcasting Receiver to the PDP as
shown left.
1. Connect a Cable Broadcasting Receiver to the PDP.
• Prepare the A/V cable.
• Connect the receiver (Output) to PDP (Video Input) as shown below.
• N.B. : If both S-Video and Video/Audio (RCA) cables are connected to-
gether in AV3 input, S-Video always takes precedence. However, the left
and right audio leads should be connected for the sound even though you
would like to use S-Video as AV3 input.

Video/Audio

S-Video
	Video/
	Audio

Cable Broadcasting

Receiver

2. Press the Power Buttons. • Turn the PDP and the receiver ON.

3. Input Select.

•Select [AV 1 (Scart), AV 2 (Scart) or AV3 (S-Video)] by pressing the “AV” button of the remote control or the in keypad of the PDP unit.

•When you press the “AV” button, you will see the OSD as shown. You can move using “/“ and select desire input mode with “/“ but- ton.

4. Select the Desired Program and Function.

•Select the desired program and function by using the remote control of the Cable Broadcasting Receiver.

Notes:

1)If your local cable company re-transmits digital broadcasts, you may watch normal broadcasts and digital broadcasts simultaneously. For detailed information, refer to your local cable company.

2)Only AV1 provides ‘Monitor Out’ function.

3)AV1 full scart (RGB/CVBS).

4)AV2 half scart (CVBS).

Picture

Sound

Screen

Feature

Input

Move

AV 1

AV 2

AV 3

Component

PC

HDMI

Select Exit

RETURN TO THE CONTENTS