User Manual BDL5571V
10
1.4. PORTRAIT MOUNTING Wall mounting holes
Notes:
Metric 8 (12mm) screws are needed for wall
mounting (not included).
The mounting interface should comply with the
UL1678 standard in North America. The
mounting means should be strong enough to
bear the weight of the monitor (approx. 38.7 kg
without stand).
How to use the Logo Guider for Portrait Mode?
a. Before applying, make sure that the guider is in good
condition. Fold the "PHILIPS" logo back in at the end of
the guider.
b. Peel off the back side of the protective film from the
logo.
c. Adjust the logo guider to align it with the long side of
the front bezel and press the guider with your hand.
d. Keep pressing the guider with your one hand and use
the other hand to fold the logo out. Make sure that the
logo is aligned with the front short bezel. Press firmly
and repeatedly on the logo to make the logo stick tight
on the front bezel.
e. Remove the guider.
How to remove the logo?
Note: When installing the monitor on the wall, please consult a professional technician for proper installing. The
manufacturer accepts no liability for installations not performed by a professional technician.
Note: The remote control sensor should be
on the lower side when rotating your monitor.