Hitachi NJI-350B manual SS11 turns off when set value ≥ progress value, Progress value is updated

						Chapter 5 Instruction Specifications
Program description
[Time chart]					1]	The progress value is updated and SS11 turns on at the leading edge
						of X00001.
X00001					2]	SS11 turns off when set value ≥ progress value.
						X00001 is turned on at this time, but the single shot startup
SS11						conditions are ignored because it uses edge trigger.
					3]	SS11 is turned on at the leading edge of X00001 again, and the
R101
						progress value is updated.
Set value 12 567
					4]	When the leading edge of X00001 is detected while the progress
Progress						value does not reach the set value, the single shot timer is triggered
value of SS11						again and the progress value returns to 0, then starts increasing. The
(TC11)	1]	2]	3]	4]		SS11 remains on.

•Example using word I/O as the set value

When RUN is commenced, the set value is set to the word I/O.

Or, the word I/O for the set value is designated to store in the power failure memory.

OUT SS n t s

5-31