Hitachi NJI-350B manual Ignored X00005 CL15 CU15 Set value Progress Value CU15 TC15

Chapter 5 Instruction Specifications

Program description

[Time chart]

		Ignored			Ignored
X00005
CL15
CU15
					65 535
Set value 4				5
				4
Progress	3		3
value of			2
CU15 (TC15)			1
	1]	2]	3]	4]	5]

1] The progress value (count) is cleared to 0 by the counter clear (CL15). While the counter clear is on, the progress value will not be updated.

2] The progress value is updated at the leading edge of X00005.

3] Counter coil (CU15) is turned on since the progress value ≥ set value.

4] The count value will not exceed 65535 (decimal).

5] The progress value and counter coil are cleared by counter clear (CL15).

•The clear is performed under the conditions set immediately prior to the execution of the counter coil instruction.

OUT CU n s

•Example using word I/O as the set value

When RUN is commenced, the set value is set to the word I/O.

Or, the word I/O for the set value is designated to store in the power failure memory.

5-33