Hitachi NJI-350B manual Load current Common Output, Ms max 24 V DC 0.2A Response time

Chapter 3 Function and Performance Specifications

(4) DC output (ESCP type): HCDC-High Current

(Y100,Y101 of EH-D14DTPS, Y100-Y103of D28DTPS)

Y*016,Y*017 of EH-EDTPS, Y*016-Y*019of EH-D28EDTPS)

Item		Specification			Circuit diagram
Output specification		Transistor output
Rated load voltage		24/12 V DC (+10 %, -15 %)
Minimum switching current		10 mA
Leak current		0.1 mA (max)
Maximum	1 circuit	1 A	Source type (EH-D**DTPS)
load current	1 common	3 A				V0
Output	OFF → ON	0.05 ms (max) 24 V DC 0.2A
response time	ON → OFF	0.05 ms (max) 24 V DC 0.2A
				Internal		0
Number of output points		See Chapter 4.
Number of common		See Chapter 4.		circuit
Surge removing circuit		None
Fuse		None
Insulation system		Photocoupler insulation				C0
Output display		LED (green)
External connection		Removable type screw terminal block (M3)
Externally supplied power *1		30 to 12 V DC
Insulation		1500 V or more (external-internal)
		500 V or more (external-external)
Output voltage drop		0.3 V DC (max)

*1: It is necessary to supply 12 to 30 V DC between the V and C terminals externally. See “4.6 Terminal Layout and Wiring.”

(5) DC output (ESCP type): LCDC-Low Current

(Y102-Y105of EH-D14DTPS, Y104-Y111of EH-D28DTPS

Y*018-Y*021of EH-D14EDTPS, Y*020-Y*027of EH-D28EDTPS)

Item		Specification			Circuit diagram
Output specification		Transistor output
Rated load voltage		24/12 V DC (+10 %, -15 %)
Minimum switching current		10 mA
Leak current		0.1 mA (max)	Source type (EH-D**DTPS)
Maximum	1 circuit	0.7 A				V0
load current	1 common	3 A
Output	OFF → ON	0.5 ms (max) 24 V DC 0.2A
				Internal		0
Number of output points		See Chapter 4.
response time	ON → OFF	0.5 ms (max) 24 V DC 0.2A		circuit
Surge removing circuit		None
Number of common		See Chapter 4.
Fuse		None				C0
Insulation system		Photocoupler insulation
Output display		LED (green)
External connection		Removable type screw terminal block (M3)
Externally supplied power *1		30 to 12 V DC
Insulation		1500 V or more (external-internal)
		500 V or more (external-external)
Output voltage drop		0.3 V DC (max)

*1: It is necessary to supply 12 to 30 V DC between the V and C terminals externally. See “4.6 Terminal Layout and Wiring.”

3-10