Chapter 14 Operation Examples

[Setting from the I/O Assign List]

1] Double-click the cell for the unit number and slot number to be set.

The Assignment Setting dialogue box is displayed.

The Assignment Setting dialogue box

v

2] Click the W of the data and select I/O type from the pull-down display.

3] Click the [OK] button to close the Assignment Setting dialogue box.

Setting of I/O type

In the same way, repeat steps 1] to 3] to assign X48 and 16 vacant points to Slot 1 and 2 respectively.

If a wrong value has been entered, the slot is left blank by assigning [Vacant 0] and is treated as though nothing is assigned to it.

4] Click the [Execute] button.

The information assigned to the PC memory is written.

5] Click the [OK] button in the confirmation dialogue box to close the I/O Assignment List dialogue box.

Confirmation dialogue box

14-5

Page 296
Image 296
Hitachi NJI-350B manual Setting from the I/O Assign List, 14-5