Hitachi NJI-350B manual 12-6

Chapter 12 Error Code List and Special Internal Outputs

No.	Name	Meaning	Description	Setting	Resetting
				condition	condition
R7D7	Undefined	Do not use.
R7D8	Undefined	Do not use.
R7D9	Battery error	0: Normal	Indicates whether battery voltage is	Set by the	Cleared by
		1: Abnormal	low	system	the system *2
R7DA	Instantaneous power	0: Not detected		Set by the	Cleared by
*1	failure detection	1: Instantaneous power failure detected.		system
					user, Cleared
R7DB		0: Normal	Indicates whether there is a self-	Set by the
	Self-diagnostic error				when
			diagnostic error (Detailed information
		1: Error		system	retentive area
			output to WRF000)
					is cleared, or
R7DC			Operation mode at CPU stop for PWM
	Output mode	0: Stops output			the CPU is
			output, pulse output and counter	Set by user
		1: Continues output			initialized.
			coincidence output.
R7DD	Undefined	Do not use.
R7DE	Undefined	Do not use.
R7DF	Undefined	Do not use.
R7E0	Key switch location	0: at RUN position		Set by the	Cleared by
	(STOP)	1: at STOP position		system	the system
R7E1	Undefined	Do not use.
R7E2	Key switch location	0: at STOP position
	(RUN)	1: at RUN position			Cleared by
R7E3	1st scan ON after	1: 1st scan after RUN	ON only at the 1st scan.		the system
	RUN
R7E4	Always ON	1: Always	Always ON regardless of CPU status		Cannot be
					cleared.
R7E5	0.02 second clock	0: 0.01 seconds
		1: 0.01 seconds
R7E6	0.1 second clock	0: 0.05 seconds		Set by the
		1: 0.05 seconds		system
R7E7	1.0 second clock	0: 0.5 seconds
		1: 0.5 seconds			Cleared by
R7E8		0: Unoccupied	Indicates CPU occupation status from
	CPU Occupation				the system
		1: Occupied	the peripheral unit
R7E9	RUN prohibited	0: Operation allowed	Indicates whether it is operation
		1: Operation prohibited	prohibited status
R7EA	Executing a online	1: Being executed	Indicates whether operation is
	change in RUN		temporarily stopped (output hold) due
			to online change in RUN
*1: Supported by software version 1.11 (WRF051=H0111) or newer.
*2: The battery error (R7D9) will turn off when the error cause is eliminated by replacing the battery, etc.

12-6