Hitachi NJI-350B manual Output specification, Ms max 24 V DC 0.2A

Chapter 3 Function and Performance Specifications

(2) DC output: LCDC-Low Current

(All points of EH-D10DT/DTP, Y102-Y105of EH-D14DT/DTP, Y102-Y109of EH-D28DT/DTP, Y*018-Y*021of EH-D14EDT/D14EDTP)

Item	Specification	Circuit diagram
Output specification	Transistor output	Sink type (EH-D**DT)

Rated load voltage		24/12 V DC (+10 %, -15 %)
Minimum switching current		1 mA
Leak current		0.1 mA (max)
Maximum	1 circuit	0.75 A 24 V DC
load current		0.5 A 12 V DC
	1 common	3 A
Output	OFF → ON	0.1 ms (max) 24 V DC 0.2A
response time	ON → OFF	0.1 ms (max) 24 V DC 0.2A
Number of output points		See Chapter 4.
Number of common		See Chapter 4.
Surge removing circuit		None
Fuse		None
Insulation system		Photocoupler insulation
Output display		LED (green)
External connection		Removable type screw terminal block (M3)
Externally supplied power *1		30 to 12 V DC
Insulation		1500 V or more (external-internal)
		500 V or more (external-external)

Internalcircuit	V0
	C0
	0
Source type (EH-D**DTP)	V0

Internal circuit	0
	C0

Output voltage drop 0.3 V DC (max)

*1: It is necessary to supply 12 to 30 V DC between the V and C terminals externally. See “4.6 Terminal Layout and Wiring.”

(3) DC output: HCDC-High Current

(Y100,Y101 of EH-D14DT/DTP, Y100, Y101, Y110, and Y111 of EH-D28DT/DTP, Y*016, Y*017 of EH-D14EDT/D14EDTP)

Item	Specification	Circuit diagram
Output specification	Transistor output	Sink type (EH-D**DT)

Rated load voltage		24/12 V DC (+10 %, -15 %)
Minimum switching current		1 mA
Leak current		0.1 mA (max)
Maximum	1 circuit	1A 24 V DC
load current	1 common	3 A
Output	OFF → ON	0.1 ms (max) 24 V DC 0.2A
response time	ON → OFF	0.1 ms (max) 24 V DC 0.2A
Number of output points		See Chapter 4.
Number of common		See Chapter 4.
Surge removing circuit		None
Fuse		None
Insulation system		Photocoupler insulation
Output display		LED (green)
External connection		Removable type screw terminal block (M3)
Externally supplied power *1		30 to 12 V DC
Insulation		1500 V or more (external-internal)
		500 V or more (external-external)

Internalcircuit	V0
	C0
	0
Source type (EH-D**DTP)	V0
Internal circuit	0
	C0

Output voltage drop 0.3 V DC (max)

*1: It is necessary to supply 12 to 30 V DC between the V and C terminals externally. See “4.6 Terminal Layout and Wiring.”

3-9