Philips CED1900BT user manual Get started, Prepare the remote control, Turn on

4 Get started

Caution

•• Risk of car accidents! Never watch video or operate this system while driving.

Prepare the remote control

For the first time use

Pull the protective sheet out.

»»The remote control is ready for use.

Replace the battery

Caution

•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

Note

•• Remove the battery if it is exhausted or if the remote control is not to be used for a long time.

•• Batteries contain chemical substances, they should be disposed of properly.

•• Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

1 Pull out the battery tray.

2 Insert one CR2025 battery with correct polarity (+/-) as indicated.

3 Insert the battery tray.

Turn on

Press .

»»PHILIPS logo and a progress bar are displayed while boot-up.

•To turn off the system, press and hold for 3 seconds.

For the fist time use

After successful boot-up, the following interface is displayed.

1 Tap to select a language for on-screen display.

»»The following interface is displayed.

12EN