Philips CED1900BT user manual Set the rear view camera, Reset the system, Replace the fuse

4 Press and hold the button on the steering wheel for one second.

»»The following interface is displayed.

5 Repeat steps 3 and 4 to assign more functions to buttons on the steering wheel.

•To clear the assignment, tap [Clear All].

Set the rear view camera

If a rear view camera is connected, you can view on the screen what the camera takes.

1 Tap > to access the full menu with all feature icons displayed.

2 Tap .

»»Picture from rear camera is displayed.

38EN

Reset the system

If the system hangs up, reset it.

1 Flip up the protective cover.

2 Press RESET with the tip of a ball-point pen or toothpick.

Replace the fuse

If there is no power, check the fuse and replace it if it is damaged.

1 Detach the main unit from dashboard.

2 Check the electric connection.

3 Remove the damaged fuse from the rear panel.

4 Insert a new fuse with the same specifications (15 A).

Tip

•• If the fuse gets damaged immediately after it is replaced, an internal malfunction may occur. In this case, consult your Philips retailer.