Philips DV900VHS owner manual Recording One Channel/Watching Another, Signal Cable Box/DBS

Hookups With a Cable Box/Direct Broadcast System (cont’d) 11

With this connection:

●You may watch one channel while recording another.

●You may not record scrambled channels.

1 DVD/VCR

			DVD/VCR
		IN	OUT
	ANT-IN	L	DVD/VCR
		AUDIO	AUDIO OUT
		R	L
	ANT-OUT
		VIDEO	R
Cable		CH3 CH4

Signal

2 Cable Box/DBS

IN

OUT

RF coaxial

cable

75 ANT / CABLE

RF coaxial

cable

Connections

1

Connect a Cable signal to the DVD/VCR’s ANT-IN (Antenna In) Jack.

2

Use an RF coaxial cable (supplied) to connect the ANT-OUT (Antenna Out) Jack on the DVD/VCR to the IN Jack on the Cable Box/DBS.

3

Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV.

Recording One Channel/Watching Another

1

Put the Cable Box/DBS on the same channel as the DVD/VCR’s CH3/CH4 switch. Set the TV to the Cable Box/DBS output channel (03 or 04).

Then, with the DVD/VCR in VCR position (the VCR light and the VCR/TV light will appear on the display panel), use the CHAN- NEL o/p buttons to select the channel you want to record at the DVD/VCR. Start the recording.

3 TV’s ANTENNA IN Jack

2

Press the VCR/TV button once to put the DVD/VCR in TV position. (The VCR/TV light will disappear.)

3

Select the channel you want to watch at the Cable Box/DBS.

Helpful Hint

•When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the DVD/VCR. Set the TV to the Cable Box/DBS output channel (03 or 04).