Philips DV900VHS owner manual You can not do a Time Search while recording

VCR

Follow the steps below to program the DVD/VCR to search for- ward or backward on a tape a specific length of time. There must be a tape in the DVD/VCR.

●Before you begin, place the DVD/VCR in VCR mode. Press the DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.

1

Press the VCR button, then press the SEARCH MODE/TIME SEARCH button.

TIME SEARCH

0:00

ENTER SEARCH TIME

2

Within 10 seconds, use the Number buttons to enter the desired length of time you want to skip forward or back- ward. For example, for 1 hour, 25 minutes, press Number but- tons 1, 2, 5. Or, for five minutes, press Number buttons 0, 0, 5.

3

Within 10 seconds, press the F.FWD button or the REW(ind) button. The DVD/VCR will skip over the specified length of time, then begin playback.

Time Search 43

	POWER			TIMER SET
	VCR/TV		DVD/VCR	MEMORY
			OUTPUT			1
3	DVD		PLAY		VCR
	REW		STOP		F.FWD
		CHANNEL			RD
				RECO
2		SKIP
					PAUSE
	1	2		3
	4	5		6
	7	8		9	SLOW
					A B
1	SPEED		+10
		0
	SEARCH MODE	DISPLAY CLEAR
	TIME SEARCH	STATUS/EXIT			REPEAT
			MENU		TITLE
			ENTER		RETURN
	SETUP	MODE	AUDIO	SUB TITLE	ANGLE

Helpful Hints

•If you want to search for more than 59 minutes, you must enter the length of time in hours and minutes. For example, to search forward 70 minutes, press 1,1,0 at step 2.

•You can not do a Time Search while recording.

•To remove the Time Search display, press the SEARCH MODE/TIME SEARCH button again.

•To cancel a Time Search that is in progress, press the STOP button.

•If the end of the tape is reached during a Time Search, the Time Search will be cancelled. The DVD/VCR may rewind the tape. Details are on page 45.