Philips DV900VHS owner manual Pausing Playback, Press the Play button to resume playback

52 Pausing Playback

DVD AUDIO CD

Pausing Playback

●Before you begin, place the DVD/VCR in DVD mode.

Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.

1

During disc playback, press the DVD button, then press the PAUSE button on the remote control. Playback will pause and the sound will be muted.

PAUSE

2

Press the PLAY button to resume playback.

PLAY

DVD

Memory On:

Resuming playback from the point where playback stopped

●Before you begin, place the DVD/VCR in DVD mode.

Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.

1

Press the DVD button, then press the STOP button during disc playback. Playback will stop, and STOP will appear at the top right corner of the TV screen. In a few seconds, MEMO ON (Memory On) will appear in the top left corner of the TV screen.

STOP MEMO ON

2

Press the PLAY button. Playback will resume from the point where playback stopped last.

PLAY

Pausing Playback...

	POWER			TIMER SET
	VCR/TV	DVD/VCR		MEMORY
1		OUTPUT
	DVD	PLAY		VCR	2
	REW	STOP		F.FWD
	CHANNEL			RD
				RECO
		SKIP			1
				PAUSE
	1	2	3
	4	5	6
	7	8	9	SLOW
				A B
	SPEED	+10
		0
	SEARCH MODE	DISPLAY CLEAR
	TIME SEARCH	STATUS/EXIT		REPEAT

Memory On...

	POWER		TIMER SET
	VCR/TV	DVD/VCR	MEMORY
		OUTPUT
2	DVD		VCR
		PLAY		1
	REW		F.FWD

STOP

Helpful Hints

•Memory On can be erased by pressing the STOP button a second time while playback is stopped. MEMO OFF will appear briefly at the top left corner of the TV screen.

•Memory On is not available with Audio CDs.

•The DVD/VCR will switch to VCR mode automatically if disc playback is paused or stopped for 30 min- utes. This helps avoid the possible burning of a still image into the TV picture tube. Details are on page 77.

•To see the on-screen display mes- sages, such as PLAY, STOP, or PAUSE, set OSD MESSAGE to ON. Details are on page 74.