Philips DV900VHS owner manual Specific Time Playback, Starting Playback at a Specific Disc Time

DVD AUDIO CD

Starting Playback at a Specific Disc Time

●Before you begin, place the DVD/VCR in DVD mode.

Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.

1

Press the DVD button, then press the SEARCH MODE button repeatedly (three times for DVDs or two times for Audio CDs).

SEARCH/TIME

TOTAL TIME: 1h23m45s

TIME [ _h_ _m_ _s ]

Start Exit

2

Use the Number buttons to enter the Disc time at which you want playback to begin.

●Example: 1 hour, 23 minutes and 30 seconds

1→ +10 → +10 → 3 → +10 → +10 → +10 → 0

●To enter zero, press the Number 0 (zero) button or press the B button.

●Make sure the time you enter is within the total time of the Disc. If it is not, you will have to enter a different time.

●If you make a mistake, press the B button repeatedly until you reach the item you need to correct (hour, minute, or second), then enter the correct information.

SEARCH/TIME

TOTAL TIME: 1h23m45s

TIME [1h05m30s]

Start Exit

3

Within 30 seconds, press the PLAY button. Playback will start at the time that you specified.

Specific Time Playback 57

	POWER		TIMER SET
1	VCR/TV	DVD/VCR		MEMORY
		OUTPUT
	DVD			VCR	3
	REW	PLAY		F.FWD
		STOP
	CHANNEL			RD
				RECO
		SKIP
				PAUSE
	1	2	3		2
	4	5	6
	7	8	9	SLOW
				A B
	SPEED		+10
		0
	SEARCH MODE	DISPLAY	CLEAR
	TIME SEARCH	STATUS/EXIT		REPEAT
			MENU	TITLE
			ENTER	RETURN

SETUP MODE AUDIO SUB TITLE ANGLE

Helpful Hint

•Specific time playback is not avail- able with some discs or if MEMO- RY OFF is activated for a DVD.

Details are on page 52.