Philips DV900VHS owner manual Timer Recording cont’d, Tape Speeds

38 Timer Recording (cont’d)

8

Press the Number 1 button to record in SP speed or the Number 2 button to record in SLP speed. (See the chart below.) You cannot use the SPEED button at this time.

ONE TIME PROGRAM

PROGRAM	1
CHANNEL	10
TIME ON	09:30 PM
TIME OFF	11:00 PM
REC SPEED	SLP
SP=1 SLP=2

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

11

POWER		TIMER SET
VCR/TV	DVD/VCR	MEMORY
	OUTPUT
DVD		VCR
	PLAY
REW		F.FWD
	STOP

9

Press two Number buttons for the month and two Number buttons for the day you want to record the pro- gram. For example, for July 10, 2000, press 07, 10. The day of the week and the year will appear automatically (you cannot pro- gram the DVD/VCR to record more than one year in advance).

ONE TIME PROGRAM

PROGRAM	1
CHANNEL	10
TIME ON	09:30 PM
TIME OFF	11:00 PM
REC SPEED	SLP
START DATE	07/10/00
	MON.

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

		CHANNEL		RD
8				RECO
		SKIP
				PAUSE
	1	2	3
9	4	5	6
	7	8	9	SLOW
				A B
	SPEED		+10

0

10	SEARCH MODE	DISPLAY		CLEAR
	TIME SEARCH	STATUS/EXIT				REPEAT
				MENU		TITLE
				ENTER		RETURN
	SETUP	MODE	AUDIO		SUB TITLE	ANGLE

10

Press the DISPLAY/STATUS/EXIT button. PROGRAM WAS COMPLETED/PLEASE PUSH TIMER-SET FOR TIMER RECORDING will appear on the screen briefly. (If PROGRAM NOT COMPLETED appears, try again from step 1.)

11

Press the TIMER SET button. The TIMER SET light will appear on the front of the DVD/VCR. The DVD/VCR will be in standby mode. If you turn on the DVD/VCR power, the DVD/VCR is in DVD mode. You can use the DVD features.

If the timer recording will take place several hours or days from now, you may use the DVD/VCR until time for the recording. Press the TIMER SET button to place the DVD/VCR in standby mode a few minutes before the recording starts.

If you forget to place the DVD/VCR in standby mode, PLEASE PUSH TIMER-SET FOR TIMER RECORDING flashes on your TV screen two minutes before a timer recording starts. Press the CLEAR but- ton to remove the message. Then press the TIMER SET button.

Press the TIMER

SET button to

place the

DVD/VCR in

standby mode. Insert a tape in the DVD/VCR. Leave the Cable Box/DBS on

(if applicable).

Tape Speeds		Cassette type/Playback Time
This chart shows the recording/playback time	Tape Speed	T160	T120		T60
for three types of video cassettes (T160, T120,	SP (standard play)	2 hrs.	2	hrs.	1 hr.
and T60). There are three playback speeds: SP,		40 mins.
LP, and SLP. When recording, you can change	LP (long play)	5 hrs.	4	hrs.	2 hrs.
the tape speed (SP or SLP) using the SPEED	(playback only)	20 mins.
button. You cannot record in LP speed.	SLP (super long play)	8 hrs.	6 hrs.		3 hrs.