Philips DV900VHS owner manual Recording One Channel/Watching Another

34 Recording One Channel/Watching Another

VCR

●Before you begin, place the DVD/VCR in VCR mode. Press the DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.

1

Press the VCR button, then press the RECORD button to start a recording of the current TV channel. Details are on page 33.

2

Press the VCR/TV button to put the DVD/VCR in TV position. The VCR/TV light will disappear from the front of the

DVD/VCR.

3

Use the TV remote control to select the channel you want to watch at the TV.

4

To return to the channel being recorded, use the TV remote control to select channel 03 or 04 at the TV (the

channel to which the CH3/CH4 switch on the back of the DVD/VCR is set). Or, if you connected the DVD/VCR to the TV using audio and video cables, select the correct audio and video in channel at the TV. Details are on page 12.

2&5

	POWER			TIMER SET
	VCR/TV		DVD/VCR	MEMORY
			OUTPUT
	DVD				VCR
6			PLAY
	REW				F.FWD
			STOP
		CHANNEL		RECORD
		SKIP
					PAUSE
	1	2		3
	4	5		6
	7	8		9	SLOW
					A B
	SPEED		+10
		0
	SEARCH MODE	DISPLAY CLEAR
	TIME SEARCH	STATUS/EXIT			REPEAT
			MENU		TITLE
			ENTER		RETURN
	SETUP	MODE	AUDIO	SUB TITLE	ANGLE

1

5

Press the VCR/TV button on the DVD/VCR remote con- trol to put the DVD/VCR in VCR position. The VCR/TV light will appear on the front of the DVD/VCR. The channel being recorded will appear on the TV screen.

6

Press the STOP button to stop the recording.

3

4

Select the channel you want to watch at the TV.

Select channel 03 or 04 at the TV.

Helpful Hint

•If you use a Cable Box or Direct Broadcast System hookup, you may not be able to watch one channel while recording another. See pages 10-11 for details.