Philips DVDR3460H Menu Language, Country Selection, TV Shape, Auto Program Manual Program

OK OK

	Setup Menu Options (continued)
SETUP settings (underlined options are the factory default settings)
	Selects the menu language for this recorder on-screen display.
Menu Language
	Select the country of your residence.
Country Selection
TV Shape	The picture shape can be adjusted to fit your TV.
	Press X to access this menu and use ST keys to select one of
	the options.
	{ 4:3 LB }	– For a ‘wide screen’ display with
		black bars on the top and bottom of
		the screen.
	{ 4:3 PS }	– For a full-height picture with sides
		trimmed.
	{ 16:9 WS }	– For wide screen TV (frame ratio
		16:9).

English

Auto Program

Manual Program

Manual Program

Programme Number
	P001	CH023
Search Type	Frequency
Frequency	0 5 8 . 9 8 Mhz
Fine Tuning
Standard	PAL B/G
NICAM	On
Audio	Dual A
Decoder	Off
Skip	No
OK OK	CANCELOK

Manual Program

Programme Number
	P001	CH023
Search Type	Channel
Channel	C-23
Fine Tuning
Standard	PAL B/G
NICAM	On
Audio	Dual A
Decoder	Off
Skip	No
OK OK	CANCELOK

Start automatic TV channel programming. Press OK to start automatic TV channel programme search. See the chapter on “Setting your TV channel programmes”.

Modify your preset TV channels.

1) Use ST keys to highlight { Manual Program } and press

A warning message will appear. Select to proceed.

2)Use ST keys to select one of the options and press X.

{Programme Number } – Use P+/ - to select by the programme number for modifying.

{Search Type } – Select the mode to search for a programme channel, either by { Frequency } or

{ Channel }.

This option is available if you have selected { Search Type - Frequency },

{Frequency } – Select this to adjust the frequency of the

channel.

– Use WX keys to search for the next frequency or use the numeric keypad 0-9to change the frequency. Press OK on the remote control to confirm the setting.

This option is available if you have selected { Search Type - Channel },

{Channel } – Select this to locate the programme number

for fine-tuning.

– Use WX keys to search for the next channel or use the numeric keypad 0-9to enter the channel number. Press OK on the remote control to confirm the setting.

63