| Troubleshooting (continued) |
|
|
Problem (Playback) | Solution |
Disc will not play. | – Insert the disc with the label facing up. |
| – Wrong region code. The DVD must be coded for ALL |
| regions or Region 2 in order to play on this recorder. |
| – There is no recording on the disc or it is not a |
| supported type of disc. Read chapter “Playback from Disc |
| - Playable discs” for details. |
| – Make sure the disc is not scratched or warped. Clean |
| the disc or replace a new one. |
| – Check if the disc is defective by trying another disc. |
The picture is distorted | – The disc does not match with the TV colour system |
or black and white | standard (PAL/NTSC). |
during playback. | – The disc is dirty, clean the disc. |
| – Sometimes a small amount of picture distortion may |
| appear. This is not a malfunction. |
English
There is picture or sound interference with the TV reception.
Distorted sound coming from a connected
The message
‘UNKNOWN DISC’ appears.
–Have your antenna or cable TV signal checked.
–
–Do not connect any cables from the recorder to the ‘Phono’ input of your amplifier.
–If you are playing a DTS CD, you have to connect the COAXIAL socket of this recorder to a
–This message may appear if you insert a disc that may have encountered one of the following:
–Error during recording: The title may be missing.
–Error while changing the title/index picture. The original title/index picture may be visible.
–Error while finalizing or the disc has not been finalised.
AVI file does not play.– The AVI file you are trying to playback is not a DivX file.
73