Display panel symbols /messages
English
The following symbols/messages may appear on your recorder display:
00:00
Multifunction display/ text line
–Title/track number
–Total/elapsed/remaining title/track time
–Disc/title name
–Additional information regarding the disc
–TV channel number or source of video
–Clock (This is displayed in Standby mode).
–TV programme title
XTIMER
A timer recording has been programmed or is active.
BLANK
No recordings on the disc.
CLOSING
Disc tray is closing.
EMPTY
No recordings in the hard disk drive.
MENU
The system setup menu, disc menu, or title menu display is on.
HDDMENU
The hard disk menu display is on.
NO DISC
No disc has been inserted. If a disc has been inserted, then it is possible that the disc cannot be read.
OPEN
Disc tray is opened or opening.
READING
Disc is being recognised by the recorder.
PHILIPS
The recorder has been turned on.
SCANXXX
Please wait until this message disappears. The recorder is busy processing an operation. XXX indicates the number of found channels.
TV/LOOP
The video input source is from your connected external device.
¡_CHXXX
In time shift mode, where XXX indicates the input video source or channel number of tuner input.
UPDATE
Please wait until the message disappears. Data is being written to the disc.
78
