Philips DVP640K manual Using Component Video jacks Y Pb Pr, Using an accessory RF modulator

Connections

									ANT IN
					RF coaxial cable to TV
					3
IN								Back of RF Modulator
		COMPONENT						(example only)
		S-VIDEO	VIDEO IN
	AUDIO	IN	V (Pr/Cr)
	IN				ANT IN	TO TV	AUDIO IN		VIDEO
			U (Pb/Cb)				R	L	IN
		VIDEO IN
			Y						CH3 CH4
				4
				Antenna or
		1		Cable TV signal					1
2
					2
VIDEO	Pb					Pb		Pr
OUT	Pr			L	VIDEO
L					OUT
R	Y			R		Y

	S-VIDEO	COAXIAL	OPTICAL
AUDIO OUT	OUT	DIGITAL OUT		S-VIDEO	COAXIAL	OPTICAL
			AUDIO OUT	OUT	DIGITAL OUT

IMPORTANT!

ÐComponent Video connection provides higher picture quality. This option must be available on your TV.

ÐThe progressive scan video quality is only possible through Component Video (Pr Pb Y) output.

Using Component Video jacks (Y Pb Pr)

1 Use the component video cables (red/ blue/green) to connect the DVD systemÕs Pr Pb Y jacks to the corresponding Component video input jacks (or labeled as Pr/Cr Pb/Cb Y or YUV) on the TV (cable not supplied).

2 To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/

R)jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable supplied).

IMPORTANT!

ÐIf your TV only has a single Antenna In jack (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.

Using an accessory RF modulator

1 Use the composite video cable (yellow) to connect the DVD PlayerÕs CVBS jack to the video input jack on the RF modulator.

2 Use the RF coaxial cable (not supplied) to connect the RF modulator to your TVÕs RF jack.

7

01-40 DVP640K_751 7 7/04/2004, 4:49 8239PM 300 30402