Getting Started
If the progressive function is activated, but your TV does not support progressive function or YPbPr cable is not connected accordingly, there will be a blank screen. You can deactivated progressive function as below:
1 Press STANDBY ON on the front panel to switch on the DVD player.
2 Press OPEN/CLOSE on the front panel to open the disc tray.
3Press numerical key pad Ô1Õ.
➜ The blue Philips DVD background appears on the TV screen.
Selecting the colour system that corresponds to your TV
This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match.
- - VIDEO SETUP PAGE - -
TV STANDARD |
| MULTI |
TV DISPLAY |
| NTSC |
CLOSED CAPTIONS |
| PAL |
VIDEO OUTPUT |
|
|
PROGRESSIVE |
|
|
SMART PICTURE |
|
|
|
|
MAIN PAGE
1Press SYSTEM MENU.
2
3
4 Use the 1 2 3 4 keys on the Remote Control to navigate in the menu.
Move to ÔTV StandardÕ and press B.
PAL Ð Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format.
NTSC Ð Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc (VCD only) and output in NTSC format.
Multi Ð Select this if the connected TV is compatible with both NTSC and PAL
Helpful Hint:
–Before changing the current TV Standard setting, ensure that your TV supports the ‘selected TV Standard’ system.
–If there is no proper picture on your TV, wait for 15 seconds for auto recovery.
- - REFER TO THE OWNER'S MANUAL - -
Changing MULTI to PAL
1.Ensure your TV supports PAL
2.If there is a blank screen on normal TV wait 15 seconds for auto recover
| OK |
| CANCEL |
1 2 - Move | OK - Select | ||
- - REFER TO THE OWNER'S MANUAL - -
Confirm again to use PAL
If picture is good, press OK button on remote control
OK |
| CANCEL |
TO GO BACK TO MULTI
1.Open tray,
2.Press '3' Key
.
1 2 - Move | OK - Select |
To exit from the menu
Press SYSTEM MENU.
13
13 | 7/04/2004, 4:49 8239PM 300 30402 |
