Philips HDTV user manual Selecting Signal Source, Using Direct Input Selection Buttons

User Manual BDH5011

INPUT SELECT (Toggle)

DIRECT INPUT SELECTING KEYS

8.2Selecting Signal Source

Using Front Panel or Remote Control

1.Press the INPUT button on the front panel or the INPUT SELECT button on the remote control.

2.Pressing the INPUT button will cycle the display through all available input signal sources in the following order:

AV S-VIDEO COMPONENT1 DVI RGB COMPONENT2

Using Direct Input Selection Buttons

1.If you prefer not to cycle through all available inputs, you can use the Direct Input Selection buttons located at the bottom of the remote control.

2.Simply select the input that you would like to switch to and press the Direct Input Selection button for that input.

Notes:

•Some of the Direct Input Selection buttons will not be applicable for this display.

For AV mode, use AV1. For S-Video, use AV2.

23