User Manual BDH5011
3.CLEANING AND MAINTENANCE
Cautions When Using the Plasma Display
• Do not bring your hands, face or objects close to the ventilation holes of the plasma display.Top of plasma display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close. Placing any object near the top of the display could also result in heat related damages to the object as well as to the display itself.
• Be sure to disconnect all cables before moving the plasma display. Moving the display with its cables attached may damage the cables, and thus, cause fire or electric shock danger.
• Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of cleaning or maintenance procedure.
Front Panel Cleaning Instructions
• The front of the display has been specially treated.Wipe the surface gently using only a cleaning cloth or a soft,
• If the surface is particularly dirty, soak a soft,
• Do not scratch or hit the surface of the panel with fingers or hard objects of any kind.
• Do not use volatile substances such as insect sprays, solvents and thinners.
Cabinet Cleaning Instructions
• If the cabinet becomes dirty, wipe the cabinet with a soft, dry cloth.
• If the cabinet is extremely dirty, soak a lint- free cloth in a mild detergent solution.Wring the cloth to remove as much moisture as possible.Wipe the cabinet.Then use a dry cloth of the same type to dry the surface.
• Do not allow any water or detergent to come into contact with the surface of the display.
If water or moisture gets inside the unit, operating problems and electrical hazards may occur.
• Do not scratch or hit the cabinet with hard objects of any kind.
6
