User Manual BDH5011
Accessing Widescreen Viewing Modes using OSD
You can also use the OSD menu to access the same widescreen and zoom mode functions:
1.Press the MENU +/- buttons on the remote control or the front control panel.
2.Make sure that the PICTURE menu is displayed.
3.Use the MENU +/- buttons to navigate to SCREEN WIDTH and use the ADJ +/- buttons to switch between 4:3, 16:9 or PANO- RAMA.
4.Use the MENU +/- buttons to navigate to ZOOM and use the ADJ +/- buttons to switch between zoom 1, 2 or 3. Please note that this function is not accessible unless the SCREEN WIDTH is set to 16:9.
10.3On-Screen Display (OSD) Settings
Accessing OSD Settings Menu
You can set various OSD display settings from the OSD menu:
1.Press the MENU +/- buttons on the remote control or the front control panel.
2.Use the ADJ +/- buttons to navigate to OTHER OSD
OSD Timeout
Initiates the OSD timer when set to ON.When set to ON, the OSD will automatically disappear from the display if no button action is detected for the set number of seconds. If set to OFF, then the OSD will remain on the screen.
OSD Time Setting
Sets the number of seconds the OSD will remain active on the display before switching itself off. OSD TIMEOUT must be set to ON for this setting to function.
OSD Brightness
Sets the brightness level of the OSD screen between 1 and 10.
OSD Background
You can set the OSD menu’s background to transparent or to blue. Set to OFF if you want a transparent setting. Set to ON if you want a blue background.
OSD Language
You can set the OSD language to English, French or Spanish.
Note: To prevent a permanent
33
