User Manual BDH5011
11.3 For RGB / DVI
Accessing Picture Adjustment Mode
Various picture adjustments can be set using the Picture Adjustment OSD menu.To access the OSD menu:
1.Press the MENU +/- buttons on the remote or the front control panel.
2.The first menu displayed is the PICTURE menu. Make sure that the PICTURE OSD Menu is displayed.
3.Use the MENU +/- buttons to move up and down to select the option you wish to adjust. An explanation of each adjustment is listed below.
4.Use the ADJ +/- buttons to change the setting.
Notes:
•These controls are available when input selection is set to: RGB or DVI inputs.
•To restore picture settings to the factory defaults, simply press the RECALL button from the remote control.
CONTRAST
Adjust Contrast to increase the white level in the video picture.
Increasing contrast will make white areas of the video picture brighter.
Contrast works in conjunction with
BRIGHTNESS.
BRIGHTNESS
Adjust brightness to enhance the level of dark areas in the video picture such as night scenes and shadow scenes. Increasing brightness will make dark areas more visible.
COLOR TEMPERATURE
Select the color temperature for white balance. There are several settings to choose from:
(1)6500D - sets the white balance to 6500D;
(2)LOW - sets to 5400K;
(3)MID - sets to 9300K;
(4)HIGH - sets to 13800K.
Note: Each of the (4) color temperature settings may vary a little from the temperature defined settings.
44
